FEATURES

• LED Ring
  Seven multi-color LED segments indicate various parameter functions. A red LED shows the selected amp model when turning the AMP encoder. Holding ALT and turning the AMP encoder shows the corresponding value. Turning an Effect knob displays the level of the selected effect on the LED segments (1-7).

• AMP Encoder
  Turn to select an amp (or turn to the detent at the 6 o'clock position for no amp). A matching speaker cab is also loaded. Press and hold the AMP encoder to save the current settings as a preset.

• Effects Knobs
  These select specific effects within each of the four effect categories. Turning them entirely counterclockwise bypasses the selected effect.

• ALT Button
  Press to access the alternate control functions (GAIN, MID, BASS, etc.). Hold to adjust the corresponding alternate parameters.

• ON Footswitch and LED
  Press to enable or bypass the device. The LED lights white when enabled.

• TAP Footswitch and LED
  Tap this footswitch in time with the music to set the tempo of delay and modulation effects, indicated by the flashing red LED. Press and hold to engage the Tuner.

• Preset Mode Switching
  Press and hold the ON and TAP footswitches simultaneously to enter Preset Mode. Then, scroll up or down through the 21 preset locations using the footswitches. All 21 preset locations may be overwritten by user presets.

• IN
  Plug your guitar in here. When using batteries, POD Express powers on when a cable is connected here and powers off when it is disconnected.

• OUT
  Connect to stereo devices (external amps, audio interfaces, other pedals, etc.) using the L/MONO and RIGHT outputs. Connect to mono devices using only the L/MONO output.

• VOLUME and FS3/4 Inputs
  This is a multi-purpose input. Connect an optional expression pedal to control volume and a single footswitch to control other functions, or a dual footswitch to control two functions.

• USB
  Connect a desktop or mobile device to use POD Express as an audio interface.

• DC IN
  Connect an optional power adapter (such as the Line 6 DC-1g) as an alternative to battery power.

• PHONES
  Connect stereo headphones here and use the VOLUME control to adjust the level.

• VOLUME
  Turn this thumbwheel to ADJUST the output level for the OUT & PHONES.