30", 36", or 52" Rip Capacity

Motor Option(s) (60Hz TEFC): 1.75 or 3 HP available

Overall saw dimensions:

- 30 in: 61 3/4" W x 31 1/8" D x 34" H

- 36 in: 69 1/8" W x 33" D x 34" H

- 52 in: 85 1/4" W x 33" D x 34" H

Motor Configuration:

- PCS175: 1.75 HP, 120v, 14 A (user config. to 220v w/ optional kit available for purchase).

- PCS31230: 3 HP, 1 phase, 230v, 13 A, Plug: NEMA 6-15P w/9’ cord

Saw body footprint: 19 3/8" W x 19 3/8" D (Cabinet Only)

Cast iron table: 20" W x 27" D

Extension wings: 12" W x 27" D each

Cast iron table (w/ extension wings): 44" W x 27" D

Extension table:

- 30 in: 12" W x 27" D

- 36 in: 23 ¾” W x 27” D

- 52 in: 40 1/8" W x 27" D

Shipping weights:

- 30 in fence systems: 430 lbs / 455 lbs (2 Boxes)

- 36 in fence systems: 505 lbs / (4 Boxes)

- 52 in fence systems: 528 lbs (4 Boxes)

Dimensions (saw body only): 42”W x 31”D x 30”H

Shipping weight (approx.):(table saw only) 375 lbs

Assembled weights - 1.75HP / 3HP

- 30" Fence: 367 lbs / 380 lbs

- 36" Fence: 408 lbs / 426 lbs

- 52" Fence: 431 lbs / 449 lbs

Weight - table saw only: 317 lbs

Blade: 40-tooth, prof. grade, 5/8" arbor

Blade diameter: 10"

Blade tilt: Left

Blade kerf: 0.118" (3mm)

Blade plate thickness: 0.078" (2mm)

Max. depth of cut, blade at 0º: 3 1/8"

Max. depth of cut, blade at 45º: 2 1/4"

Max. rip, right of blade: 30", 36", or 52" (depending on selected rails)

Max. rip, left of blade: 12"

Dado diameter: 8" (requires dado brake cartridge & insert)

Dado max. width: 29/32”

Arbor diameter at blade: 5/8"

Main bearing size: 62mm OD x 30mm ID

Second bearing size: 52mm OD x 25mm ID

Table in front of blade (max. elevation): 10 1/4"

Table behind blade (max. elevation): 7 1/2"

Arbor Runout: 0.001" Maximum allowable runout

Table flatness measured diagonally: 0.010" Maximum gap

Blade alignment with miter slot: 0.010" Maximum displacement

Deviation of miter gauge indexing stops from actual: ±0.25º

Alignment between splitter and blade: 0.010" Maximum difference

Miter slots T-shaped: 3/4" at top, 1" at bottom, 3/8" deep

Miter slots center: 11 1/8" center-to-center

Miter slots info: 5 1/2" (arbor flange to center of right slot)

Dust collection port diameter: 4"

Riving knife / splitter thickness: 0.090" (2.3 mm)

Dust collection blade guard (optional on 1.75 HP saws): polycarbonate, extends 1-3/16" right of blade

Blade guard: (dust collection) port diameter 1-1/2" Outside, 1-1/4" Inside

Insert: zero clearance, phenolic core, melamine surfaces

Micro blade guard (standard on 1.75 HP saws): polycarbonate, extends 1" right of blade

Hand wheels: 7" diameter, cast iron w/ chrome handle

Belts: 2 V-ribbed belts - arbor b. static dissipative